Menu Close
v0.33.2 / Operations-Guide / Running Metabase on Elastic Beanstalk

Covered in this guide:

Running Metabase on AWS Elastic Beanstalk

The Metabase team runs a number of production installations on AWS using Elastic Beanstalk and currently recommend it as the preferred choice for production deployments. Below is a detailed guide to installing Metabase on Elastic Beanstalk.

Quick Launch

Metabase provides an Elastic Beanstalk pre-configured launch url to help new installations getting started. If you are starting fresh we recommend you follow this link to begin creating the Elastic Beanstalk deployment with a few choices pre-filled.

Launch Metabase on Elastic Beanstalk

The rest of this guide will follow each phase of the Elastic Beanstalk setup step-by-step.

New Application

You should now see a screen that looks like

Elastic Beanstalk First Screen

NOTE: If this screenshot does not match what you see in the Elastic Beanstalk console, it is likely that you are on an old version of the Elastic Beanstalk UI. At the time of writing this documentation, both versions of the UI are being reported in the wild. You can view our older documentation here

While most of the fields are correctly prefilled by following the launch url above, “Sample Application” will be incorrectly selected. To run Metabase successfully, you’ll need to click the radio button for “Upload your code”.

Elastic Beanstalk is organized into Applications and Environments, so to get started we must create a new Application. You can customize the application name here.

Elastic Beanstalk ApplicationInformation

Environment Information

Here you are given a chance to pick a name and url that you want to use for running Metabase instance. Feel free to get creative, just remember that the URL for your Metabase instance must be unique across all AWS Elastic Beanstalk deployments, so you’ll have to pick something nobody else is already using.

We often recommend something like mycompanyname-metabase

Elastic Beanstalk Environment Information

And of course if you don’t care about the URL you can simply leave it to whatever Amazon inputs by default.

New Environment

Elastic Beanstalk provides two choices for environments within an Application, but you should leave the setting to Web Server on that landing page.


Base Configuration

For the base configuration settings we want to make the following selections:

  • Platform: Preconfigured Platform > Docker
  • Application Code: Upload Your Code

Elastic Beanstalk Base Configuration

This will run our Metabase application using Docker under the hood.

If you reached this screen from the Metabase start page at the application code settings will have already been set and you don’t need to do anything. This will use the official Metabase Docker image which is published on Dockerhub.

When your environment type settings look like the above then go ahead and click Review and launch.

Enabling enhanced health checks

You will need to enable enhanced health checks for your Beanstalk Monitoring.

Click on the modify link under the Monitoring section as below. Elastic Beanstalk Monitoring

Then make sure enhanced health checks are enabled. This is a free option, unless you later add specific metrics to CloudWatch.

Elastic Beanstalk Monitoring Settings

Configuring RDS for Metabase

To run Metabase in a cloud environment of any kind we highly recommend using an independent database server with high availability such as Amazon RDS. So for standard deployments we will choose to create an RDS instance with our Elastic Beanstalk application.

NOTE: it’s possible to skip this step if you wish, however this will force Metabase to use a local H2 database file on your application server and there will be no way to backup and maintain that database, so when your instance is restarted for any reason you’ll lose all your Metabase data. If you are just doing a quick trial of Metabase that may be okay, but otherwise we recommend against this.

To set the database password from the Beanstalk template, hit “Review and Launch”, and then look for the Database configuration pane as below. It should have a red outline when you first see this page.

Elastic Beanstalk Database Configuration Options

Once there, enter a database username and password. We suggest you hold onto this in a password manager, as it can be useful for things like backups or troubleshooting.

Elastic Beanstalk Database Settings

Regarding individual settings, we recommend:

  • Snapshot should be left as None.
  • DB engine should be set to postgres. Metabase also supports MySQL/Maria DB as backing databases, but this guide currently only covers running Metabase on Postgres.
  • DB engine version can simply be left on the default, which should be the latest version.
  • For Instance class you can choose any size, we recommend db.t2.small or bigger for production installs. Metabase is pretty efficient so there is no need to make this a big instance.
  • You can safely leave Allocated storage to the default size.
  • Pick a Username and Password for your database. This is just for reference if you need to connect to your db directly for some reason, but generally this should not be necessary. These settings will be automatically made available to your Metabase instance, so you will not need to put them in anywhere manually.
  • You can safely leave the Retention setting as Create snapshot
  • Under Availability we recommend the default value of Single Availability Zone for most circumstances.

Once you’ve entered a password and clicked Save, the red outline should have gone away, indicating that the application is valid and ready to be launched.

Additional Options

Using Metabase in a VPC

Newer AWS accounts are encouraging the use of VPC for deployments and in general we think it’s simplest to follow that best practice.

If you prefer not to use a VPC that is fine, however one thing to note is that some EC2 instance types (t2.* in specific) are not available outside of a VPC, so if you choose to not use a VPC then make sure and pick appropriate instance types.

Elastic Beanstalk VPC Entry

If you are launching your Metabase inside of a VPC you’ll now need to check a few boxes to enable your application to work inside your VPC subnets.

Unless you have a custom VPC setup that you know how to configure it’s easiest to just check all the boxes and allow your infrastructure to exist on all subnets. Note that the Load Balancer cannot be in more than one subnet per availability zone, and the database requires subnets in at least two availability zones.

Elastic Beanstalk VPC Settings

Once you’ve finished your VPC config click Save

Configuration Details

There are many ways to customize your Beanstalk deployment, but commonly modified settings include:

  • Instance type is for picking the size of AWS instance you want to run. Any size is fine but we recommend t2.small for most uses.
    • Remember that you cannot choose a t2.* instance type if you did not check the box to run in a VPC.
  • EC2 key pair is only needed if you want to ssh into your instance directly. We recommend leaving this out.
  • Enter an Email address to get notifications about your deployments and changes to your application. This is a very simple way to keep tabs on your Metabase environment, so we recommend putting a valid email in here.
  • The Application health check URL is how Elastic Beanstalk knows when the application is ready to run. You must set this to /api/health
  • The remainder of the options can all be safely left to their default values


If this is your first time creating an application for Elastic Beanstalk then you will be prompted to create a new IAM role for your launched application. We recommend simply leaving these choices to their defaults.


When you click Next a new tab will open in your browser and you will be prompted to create a new IAM role for use with Elastic Beanstalk. Again, just accept the defaults and click Allow at the bottom of the page.


Wait for your Environment to start

This can take a little while depending on Amazon. It’s not strange to see this take 20-30 minutes, so feel free to do something else and come back to check on it. The time taken here is to provision each part of the environment.

When all is well you should see something like this:


To see your new Metabase instance simply click on the link in parentheses next to your environment name. In this example it’s

Now that you’ve installed Metabase, it’s time to set it up and connect it to your database.

Deploying New Versions of Metabase

Upgrading to the next version of Metabase is a very simple process where you will grab the latest published Elastic Beanstalk deployment file from Metabase and upload it to your Application Versions listing. From there it’s a couple clicks and you’re upgraded.

Here’s each step:

  1. Go to Elastic Beanstalk and select your Metabase application
    • Click the Upload button on the upper right side of the listing
      • Give the new version a name, ideally including the Metabase version number (e.g. v0.33.2)
      • Select Choose File and navigate to the file you just downloaded
      • Click the Upload button to upload the file
    • After the upload completes make sure you see your new version in the Application Versions listing * Deploy the new Version
    • Click the checkbox next to the version you wish to deploy
    • Click the Deploy button in the upper right side of the page
      • Select the Environment you wish to deploy the version to using the dropdown list
      • Click the Deploy button to begin the deployment
    • Wait until all deployment activities are completed, then verify the deployment by accessing the Metabase application url

Once a new version is deployed you can safely delete the old Application Version if desired. we recommend keeping at least one previous version available for a while in case you desire to revert for any reason.

Retaining Metabase Logs

If you want to retain the Metabase application logs you can do so by publishing then to an S3 bucket of your choice. Here’s how:

  1. On you Metabase Elastic Beanstalk environment, click on the Configuration link in the navigation bar on the left side. You will be taken to a page with a number of boxes containing different configuration options for your environment.
    • Click on the box labeled Software Configuration under the heading Web Tier
    • Scroll down and then check the box labeled Enable log file rotation to Amazon S3
    • Click Save in the bottom right corner

After you click save your Environment will begin updating with your new change. you will have to wait a minute for this to complete and then you’re good to go. Elastic Beanstalk will now periodically publish the application log files to S3 for you and you can download them and analyze them at your leisure.

Running Metabase over HTTPS

Upload a Server Certificate

This is only relevant if you plan to use HTTPS (recommended) for your Metabase instance on AWS. There is no requirement to do this, but we are sticklers for security and believe you should always be careful with your data.

Sadly there is no option to do this via the AWS Console, so this step must be performed using the AWS CLI client

aws iam upload-server-certificate \
	--server-certificate-name <your-cert-name> \
	--certificate-body file:///path/to/certificate.crt \
	--private-key file:///path/to/private-key.pem

This will create a new certificate inside your AWS environment which can be reused for a variety of things. Remember the name you chose for your certificate because we’ll use that later in the setup process when we enable SSL.

Setup DNS CNAME (using AWS)

  • Open up the AWS Route 53 console by navigating to Services > Networking > Route 53 in the AWS Console header
  • Click on Hosted Zones then click on the domain name you want to use for Metabase
  • Click on the blue button Create Record Set (a new panel will open up on the right side of the page)
    • Enter in a Name: for your application. this should be the exact url you plan to access Metabase with. (e.g.
    • Under the dropdown for Type: select CNAME - Canonical name
    • In the box labeled Alias: input the full path to your Elastic Beanstalk environment (e.g.
    • Leave all other settings in their default values and click the Create button at the bottom of the page
    • NOTE: after the record is created you must wait for your change to propagate on the internet. this can take 5-10 minutes, sometimes longer.

Modify Metabase to enforce HTTPS

Before trying to enable Https support you must upload a server certificate to your AWS account. Instructions above.

  1. Go to Elastic Beanstalk and select your Metabase application
    • Click on Environment that you would like to update
    • Click on Configuration on the left hand sidebar
    • Scroll down to Load Balancing under the Network Tier section and click the gear icon to edit those settings.
    • Set the value for Secure listener port to 443
    • Then, a little bit lower on the dropdown for SSL certificate ID, choose the name of the certificate that you uploaded to your account.
      • NOTE: the certificate MUST match the domain you plan to use for your Metabase install
    • Scroll to the bottom of the page and click Save in the lower right
      • NOTE: your Environment will begin updating with your new change. you will have to wait for this to complete before making additional updates
      • IMPORTANT: once this change is made you will no longer be able to access your Metabase instance at the * url provided by Amazon because it will result in a certificate mismatch. To continue accessing your secure Metabase instance you must Setup a DNS CNAME

Once your application is working properly over HTTPS we recommend setting an additional property to force non-https clients to use the HTTPS endpoint

  1. Click on Configuration on the left hand sidebar
    • Scroll down to Software Configuration under the Web Tier section and click the gear icon to edit those settings.
    • Under Environment Properties add an entry for NGINX_FORCE_SSL with a value of 1
    • Scroll to the bottom of the page and click Apply in the lower right, then wait for your application to update.

Setting the JVM Timezone

It’s best to set your JVM timezone to match the timezone you’d like all your reports to come in. You can do this by adding the JAVA_TIMEZONE environment variable.

  1. Click on Configuration on the left hand sidebar
    • Scroll down to Software Configuration under the Web Tier section and click the gear icon to edit those settings.
    • Under Environment Properties add the following
    • JAVA_TIMEZONE with a value such as US/Pacific * Scroll to the bottom of the page and click Apply in the lower right, then wait for your application to update.

Using Papertrail for logging on AWS

This provides a simple way to use the Papertrail logging service for collecting the logs for you Metabase instance in an easy to read location.

  1. Click on Configuration on the left hand sidebar
    • Scroll down to Software Configuration under the Web Tier section and click the gear icon to edit those settings.
    • Under Environment Properties add the following entries
    • PAPERTRAIL_HOST - provided by Papertrail
    • PAPERTRAIL_PORT - provided by Papertrail
    • PAPERTRAIL_HOSTNAME - the name you want to see showing up in Papertrail for this server * Scroll to the bottom of the page and click Apply in the lower right, then wait for your application to update.

NOTE: sometimes these settings will not apply until you restart your application server, which you can do by either choosing Restart App Server(s) from the Actions dropdown or by deploying the same version again.